.png)
.png)
.jpg)
.png)
.png)
.jpg)
Masonry Drill Bit for Concrete Plastic Soft Metal Tile Glass Wood Wall Mirror Ceramic Brick Wall
This Masonry Drill Bit includes six premium SDS‑Plus impact bits ranging from 10 mm to 25 mm, engineered for fast, precise holes in tile, concrete, cement board, marble, brick, PVC, and more. The set features a reinforced 4‑cutter carbide head for superior wear resistance and rapid material removal in hard substrates. An included quick‑change triangular shank adapter makes it compatible with standard drill chucks and impact drivers, delivering versatility across applications.
Key Features
-
SDS‑Plus Shank with Triangular Adapter: Fits SDS‑Plus rotary hammers and standard drills via the supplied adapter, enabling seamless bit changes and multi‑tool compatibility.
-
Premium 4‑Cutter Carbide Tips: Tungsten‑carbide heads resist wear and jamming in reinforced concrete, cutting through tile and masonry cleanly.
-
Wide Diameter Range (10 – 25 mm): Covers common door‑lock, downlight, and feed‑through hole sizes without swapping bits.
-
Multi‑Material Capability: Rated for drilling tile, ceramic, porcelain, concrete, brick, marble, drywall, PVC, and light metals—ideal for electricians, plumbers, and installers.
-
Impact‑Rated Construction: Reinforced flute design reduces vibration and heat buildup during hammer‑drill operation for longer bit life.
Specifications
| Parameter | Details |
|---|---|
| Bit Sizes | 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 25 mm |
| Shank Type | SDS‑Plus (adapter to 1/2″ hex & 10 mm Triangular shank included) |
| Material | High‑grade steel shank; tungsten‑carbide tip |
| Flute Design | Deep spiral flutes for chip evacuation |
| Overall Length | 101mm- 120mm |
| Coating | Optional black oxide on shank for corrosion resistance |
| Max RPM | 2,500 – 3,000 RPM (impact mode) |
Applications
-
Tile & Ceramic Drilling: Cleanly puncture glazed surfaces without cracking (use low speed, light pressure).
-
Concrete & Masonry: Rapid hole creation for anchors and anchors in concrete, brick, and cinder block.
-
Marble & Stone: Serrated carbide tips bite into stone for fixture and downlight cut‑outs.
-
Drywall & Cement Board: Fast feed‑through holes for wiring and plumbing rough‑ins.
-
PVC & Light Metal: Secondary usage in PVC conduit and thin sheet metal with the same set.
Usage Tips
-
Pilot Start: Mark hole center; begin at low speed to position the tip before switching to full hammer mode.
-
Steady Pressure: Apply constant, moderate force—avoid jamming by letting the bit’s carbide tip do the cutting.
-
Periodic Withdrawal: Pull the bit out regularly to clear debris and prevent overheating under prolonged hammering.
-
Correct Drill Mode: Use rotary‑hammer mode on concrete or impact setting on masonry; switch to standard mode for tile.
Maintenance & Care
-
Clean & Inspect: After each use, remove dust and residue with a brush; inspect the carbide tip for chipping.
-
Sharpening & Replacement: Dull bits should be professionally re‑tipped or replaced to maintain performance.
-
Storage: Keep bits dry in the provided case; avoid moisture to prevent shank corrosion.
This Masonry Drill Bit delivers unmatched versatility and durability for professional installers and DIY enthusiasts tackling a wide range of drilling tasks.
